POSIFLEX Business Machines PP7700 Series User Manual
Page 18
2 - 8
setup procedure since this BT ID could mean lengthy and
hard to memorize by heart to average people.
3.
At the host system that the Dongle is connected, first make
sure that the COM port is exclusively free for Posiflex
wireless connection. Then execute the “Posiflex Wireless
Printer Setup” (or “BTSetUp.exe” as filename) and select the
COM port that the Dongle is connected. If there are more
than one Dongle connected in a host system, please do the
setup procedure for one Dongle at a time.
4.
Check in the above screen that when the Dongle is well
installed and recognized by the software a 12 digit Dongle ID
will appear in the field for “HOST: BT Address”. Double
check the installation if it still shows “NONE” here. Do a
“Query Printer” and in the “PRINTER” field all BT ID of the
wireless printers within communication range will be
displayed. Select the BT ID that match the one for wireless
printing that you wrote down previously. Clicking for
“Connect” will engage that printer to be connected to the