Panasonic AJ-D850A - Manual (Page 64)

Setup menus
– 64 –
USER menu
<EDIT> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
308 CONFI 0000 OFF
EDIT 0001 ON
309 AUD EDIT 0000 CUT
IN 0001 FADE
310 AUD EDIT 0000 CUT
OUT 0001 FADE
311 AUTO 0000 DIS
ENTRY 0001 ENA
312 CF ADJ 0000 PLAYER
SEL 0001 RECORD
313 AFTER 0000 STOP
CUE-UP 0001 STILL
316 VAR STEP 0000 FINE
0001 COARSE
317 VAR FWD 0000 +4.1
MAX 0001 +1.85
0002 +1
0003 +0.75
0004 +0.5
0005 +0.3
0006 +0.2
0007 +0.1
0008 +0.03
The underline on the setting item denotes the initial setting.
This selects whether to conduct simultaneous playback while
editing is in progress.
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
This selects the connection method for the digital audio edit IN
point.
0: Cut processing
1: V Fade processing
This selects the connection method for the digital audio edit
OUT point.
0: Cut processing
1: V Fade processing
This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player’s edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder’s edit IN/OUT points are adjusted. (reference
as the PLAYER side)
This selects the mode after cue-up operation is complete.
0: STOP mode
1: SHTL STILL mode
This selects the VAR speed during remote control operations.
0: The tape is played at the fine step speed.
1: The tape is played at a speed at which noise-less playback
is possible in the –0.43
×
to +1
Ч
(–0.5
Ч
to +1
×
) range.
<Notes>
• The tape will be played at the speed given in parentheses in
the DV/DVCAM mode.
• At the 1 (COARSE) setting, the phase cannot be synchro-
nized from the editing controller.
This sets the maximum VAR FWD speed.
0: +4.1
Ч
(+3.1
Ч
) speed
1: +1.85 Ч (+1.85 Ч ) speed
2: +1
Ч
(+1
Ч
) speed
3: +0.75 Ч (+0.5 Ч ) speed
4: +0.5
Ч
(+0.5
Ч
) speed
5: +0.3
Ч
(+0.3
Ч
) speed
6: +0.2
Ч
(+0.2
Ч
) speed
7: +0.1
Ч
(+0.1
Ч
) speed
8: +0.03 Ч (+0.03 Ч ) speed
<Notes>
• The tape will be played at the speed given in parentheses in
the DV/DVCAM mode.
• In the DV/DVCAM mode, the maximum speed is set to +1
×
when the dial on the front panel is operated.
• At any speed setting other than 0 (+4.1), the phase cannot
be synchronized from the editing controller.