Pride Mobility QUANTUM 1121 - Manual (Page 24)

24 www.quantumrehab.com Quantum 1121
ADJUSTMENT
SCREWS
V . C O M F O R T A D J U S T M E N T S
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex key.
See figure 18.
To adjust the foot platform angle:
1. Locate the setscrew on the underside of the foot platform.
2. Turn the setscrew clockwise to raise the front of the
foot platform.
3. Turn the setscrew counterclockwise to lower the front of
the foot platform.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 19.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of each
footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of adjust-
ment for the leg angle and a footrest adjustment range of 12–
19 in. See figure 20.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two screws from the side of each leg rest
extension. See figure 20.
2. Slide the leg rest in or out to the desired length.
3. Reinstall the two screws on each leg rest extension.
Figure 20. Elevating Leg Rests
LEG REST
EXTENSION
Figure 19. Swing-Away Footrests
RELEASE LEVER B
RELEASE LEVER A
ADJUSTMENT
SCREWS
FOOTREST
EXTENSION
SFR RELEASE
LEVER