Pioneer VSX-45TX - Manual (Page 33)

33
PREP
ARA
TION
PREP
ARA
TION
Displays & Controls
Display
All the display information is explained and/or referenced here.
10 Hi-BIT/SAMPLING indicator
Lights when a HI-BIT/SAMPLING mode is on.
11 DSP indicators
MOVIE: Lights when a MOVIE mode is
selected. When a DSP MOVIE mode is select-
ed DSP will light with a box around it.
MUSIC: Lights when a MUSIC mode is
selected. When a DSP MUSIC mode is select-
ed DSP will light with a box around it.
12 Program Format indicators
For Dolby Digital or DTS sources: These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source with a
6.1 channel playback flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel or Surround back channel.
RS – Right surround channel.
LFE – Low Frequency Effects channel.
‡ – Lights when LFE signal is input.
13 SB CH indicators
Light to indicate the status of the surround
back channels.
AUTO – Lights when the SB CH MODE or
VIRTUAL SURROUND BACK mode is set to
AUTO.
ON – Lights when the SB CH MODE or
VIRTUAL SURROUND BACK mode is set to
ON.
OFF – Lights when the SB CH MODE or
VIRTUAL SURROUND BACK mode is set to
OFF.
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
AUTO: Lights when the receiver is set to select
the input signal automatically.
DIGITAL: Lights when digital audio signals are
selected.
ANALOG: Lights when analog signals are
selected.
2 Digital format indicators
PRO LOGIC II: Lights during Dolby Pro Logic II
processing.
NEO:6: Lights during NEO:6 processing.
2 DIGITAL: Lights when a Dolby Digital signal is
detected.
DTS: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
EX: Lights when playing back a Dolby Digital EX
signal.
STEREO: Lights during two-channel playback.
3 LOUDNESS indicator
Lights when LOUDNESS is on.
4 MIDNIGHT indicator
Lights when MIDNIGHT is on.
5 TONE indicator
Lights when the TONE control is on.
6 DNR indicator
Lights when DIGITAL NR is on.
7 TUNER indicators
STEREO: Lights when an FM stereo broadcast
is received in the auto stereo mode.
MONO: Lights when the tuner is set to receive
FM broadcasts and when MPX mode is selected.
TUNED: Lights when a broadcast is received.
8 Volume level indicator
9 MULTI ROOM indicator
Lights when the MULTI ROOM system is on.
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
dB MONO Neo :6
L C R LFE
L S S R S
SIGNAL
AUTO
AUTO
RF
DIGITAL
SB CH
DSP
ON MOVIE
MUSIC
OFF
SP A B
ANALOG
1
13 12 11 10
2 7 3 4 5 6
9 8