Pioneer VSX-45TX - Manual (Page 50)

50
Basic Operation
Reducing Noise During Playback (DIGITAL NR Function)
To reduce extraneous noise switch on DIGITAL NR. This feature is effective with sources containing a lot of
background noise like cassette and video tape
1 Press RECEIVER.
2 Press the DNR button on the remote
control.
Each press switches DIGITAL NR on or off.
When on, DNR lights in the display.
• In cases described below, noise may not be reduced even
if DIGITAL NR is on.
· Sudden noise
· Extremely loud noise
· Signals that contain too many high frequencies
Signals which are very clean to begin with.
• DIGITAL NR is effective at levels shown below for each
source.
STEREO
· Analog input ..................................................... 10-18 dB
· Digital input ...................................................... 10-15 dB
· AM/FM tuner ................................................... 10-15 dB
MOVIE/MUSIC ...................................................... 6-10 dB
• Depending on the condition of the source, there may not
be a noticeable improvement in the quality of the sound.
• You can’t use the DIGITAL NR mode with the THX
CINEMA or MULTI CH IN modes, or a 96 kHz signal.
• If you set the DIGITAL NR on in DIRECT mode the
receiver will switch to STEREO mode.
memo
1 Press the ACOUSTIC EQ button.
Each press switches ACOUSTIC CALIBRATION EQ
between ALL CH ADJUST, FRONT ALIGN, CUSTOM 1,
CUSTOM 2 and OFF. When ACOUSTIC EQ is being
applied the MCACC indicator lights.
Listening with ACOUSTIC CALIBRATION EQ
You can listen to the soundtrack with the ACOUSTIC CALIBRATION EQ you set automatically when you did the
AUTO SURROUND SETUP (page 13) or you set manually on (page 100–102). To do so follow the instructions
below.
memo
STEREO/DIRECT MULTI CH IN
MASTER VOLUME
ACOUSTIC EQ
MULTI CHANNNEL ACOUSTIC CALIBRATION
VSX-45TX AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STATION TUNING MULTI ROOM
CONTROL ON/OFF & SOURCE SELECT TUNER EDIT
1
Î
REMOTE
SETUP
MODE
SURROUND
TV INPUT
TV CONTROL
TV CH
TV VOL VOLUME
INPUT
MIDNIGHT
MULTI CH
INPUT
STEREO/
DIRECT
MOVIE MUSIC
ENTER
MUTE
SB CH MODE
ACOUSTIC
EQ 1
OFF
S0URCE TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD TV/SAT TV CONT VCR1/ DVR
VCR2 VIDEO CD MULTI
OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1 TUNER RECEIVER
1 2
LOUDNESS TONE
3 4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+ 10 DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
AUDIO
EXIT
RETURN
ENTER
SETUP
1
2
MCACC indicator
• After completing the AUTO SURROUND SETUP
(page 13) ACOUSTIC EQ ON (ALL CH ADJUST)
is set automatically.
• You can’t turn on ACOUSTIC EQ on in MULTI CH
IN mode.
• If you turn ACOUSTIC EQ on in DIRECT mode,
the receiver automatically switches to STEREO
mode.
ALL CH ADJUST FRONT ALIGN
CUSTOM 1 CUSTOM 2 OFF