Pioneer VSX-45TX - Manual (Page 96)

96
Fine Tuning Your System
Expert Setup
The settings here can only be done if you've performed the more basic preliminary setups. Thus, before doing
these settings do either AUTO setup (page 13–15), QUICK setup (page 38) or NORMAL setup (page 39–43).
These settings are to further heighten your surround sound. They are not absolutely necessary but may give
more defined and enjoyable surround sound. You can decide if you want to make these settings or not. You only
need to make these settings once (unless you change the placement of your current speaker system, add new
speakers or components to your system, etc.). These setup operations use your TV to display the settings and
choices so be sure your TV and receiver are properly hooked up.
Use the arrow buttons (
5∞) and the ENTER
button on the remote control to navigate the OSDs on your TV. Conversely, you can use the MULTI JOG
dial and ENTER button, and look at the display, on the Front Panel.
1 Turn on the receiver and your TV,
press RECEIVER on the remote
control.
Make sure your TV is set to the receiver.
2 Press the SYSTEM SETUP button.
The menu possibilities appear on your TV.
3 SURROUND SETUP should be
selected (if it's not use the
5∞
buttons to select it). Press the
ENTER button.
4 Select EXPERT with the
5∞ buttons.
Press the ENTER button.
5 Follow the order below to make
expert settings. Use the
5∞ buttons
to navigate through the menus.
When you have the setting you want
in particular menu, press ENTER.
In each mode, the current settings are displayed on
the screen.
CROSSOVER NETWORK (page 97)
This feature determines which frequencies will be sent
to the subwoofer (or large speakers).
FINE CHANNEL LEVEL (page 98)
This feature balances the sound output level of your
speakers more finely than in the NORMAL setup.
FINE CHANNEL DELAY (page 99)
This feature adjusts the delay level of your speakers
more finely than in the NORMAL setup.
ACOUSTIC CAL EQ (pages 100–102)
This feature allows you to adjust the amount of a
certain frequency in a soundtrack, acting as a kind of
room equalizer for your speakers.
BASS PEAK LEVEL (page 103)
Dolby Digital and DTS audio sources include ultra-low
bass tones. Set the bass peak level as needed to
prevent the ultra-low bass tones from distorting the
sound from the speakers.
DYNAMIC RANGE CONTROL (page 104)
This feature makes possible excellent surround sound
effects when listening to Dolby Digital and DTS
sources at low volumes.
Expert
[ Crossover Network ]
[Fine Channel Level ]
[Fine Channel Delay ]
[Acoustic Cal EQ ]
[Bass Peak Level ]
[D-Range Control ]
[Exit
]
1.Surround Setup
[ SurrBack System ]
[ Auto Setting ]
[ Quick
]
[ Normal ]
[ Expert ]
[ Exit ]
4
5
MULTI CONTROL
DVD/LD TV/SAT TV CONT VCR1/ DVR
VCR2 VIDEO CD MULTI OPERATION
DIMMER
MD/ TAPE2 CD-R/ TAPE1 TUNER RECEIVER
1 2
LOUDNESS TONE
3 4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+ 10 DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
¶
DTV ON/OFF DISP MODE
8 SUB TITLE
1
2
3-5
System Setup
[ 1. Surround Setup
[2. THX CINEMA Setup
[3. Input Assign
[4. Function Rename
[5. PHONO/LINE Setup
[6. Multi Room
[7. 12V Trigger
[Exit
]
]
]
]
]
]
]
]
3
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE HI-BIT HI-SAMPLING SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
BAND MULTI JOG CONTROL
3-5 2