Pioneer VSX-45TX - Manual (Page 54)

54
Basic Operation
VIRTUAL SURROUND BACK Mode
The VIRTUAL SURROUND BACK mode emulates surround back channels through your surround speakers. You
must have chosen NORMAL SYSTEM in the SURRBACK SYSTEM setting (see page 37); have SURROUND
speakers set to something other than NO, and have chosen NO for the SURROUND BACK speakers in
SPEAKER SETTING (see page 40-41) to use this mode. To accomplish the same settings, you could have had
the AUTO SURROUND SETUP automatically set the SURROUND speakers on and the SURROUND BACK
speakers off (see pages 13-15) to use this mode.
1 Press the SB CH MODE button on the
remote control.
Each press switches between VIRTL SB ON, VIRTL SB
OFF and VIRTL SB AUTO.
For each choice you can create
VIRTUAL SURROUND BACK channels under the
conditions listed below.
VIRTL SB ON: virtual surround back sound is available
with all SURROUND modes except THX CINEMA; for a
stereo signal you must choose the NEO:6 MOVIE/MUSIC
SURROUND mode or a Pioneer original sound mode (see
pages 47–48).
VIRTL SB AUTO: same as above except whether virtual
surround back sound is available with any of the PRO
LOGIC II (or PRO LOGIC) modes depends on whether the
source has an EX or ES flag or not.
With the NEO:6 modes virtual surround back sound will
always be available.
VIRTL SB OFF: virtual surround back sound will not be
heard.
memo
Î
REMOTE
SETUP
MODE
SURROUND
STEREO/
DIRECT
MOVIE MUSIC
ENTER
MUTE
SB CH MODE
ACOUSTIC
EQ 1
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE HI-BIT HI-SAMPLING
SETUP MIC
DIGITAL IN S-VIDEO VIDEO VIDEO INPUT AUDIO L R
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
CLASS BAND
STATION TUNING MULTI ROOM
MULTI JOG/ENTER
CONTROL ON/OFF
& SOURCE MULTI JOG CONTROL
SELECT
TUNER
EDIT
1
SB CH MODE button
SB CH MODE
The SB CH MODE makes available surround back channels through your surround back speakers. You must
have chosen NORMAL SYSTEM in the SURRBACK SYSTEM setting (see page 37) and have SURROUND and
SURROUND BACK speakers set to something other than NO (see pages 40–41) to use this feature. To
accomplish the same settings, you could have had the AUTO SURROUND SETUP automatically set the
SURROUND and the SURROUND BACK speakers on (see pages 13–15).
1 Press the SB CH MODE button on the
remote control.
Each press switches between ON, OFF and AUTO.
For each choice you can create SURROUND BACK
channels under the conditions listed below.
ON: surround back channels are available with all
SURROUND modes.
AUTO: same as above except whether SURROUND BACK
channels are available with any of the PRO LOGIC II (or
PRO LOGIC) modes depends on whether the source has
an EX or ES flag or not.
With the NEO:6 modes surround back channels will
always be available.
OFF: SURROUND BACK channels will not be heard.
• You can’t use the SB CH MODE with MULTI CH IN
or STEREO/DIRECT modes.
memo
Î
REMOTE
SETUP
MODE
SURROUND
STEREO/ DIRECT
MOVIE MUSIC
ENTER
MUTE
SB CH MODE
ACOUSTIC
EQ 1
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE HI-BIT HI-SAMPLING
SETUP MIC
DIGITAL IN S-VIDEO VIDEO VIDEO INPUT AUDIO L R
SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
CLASS BAND STATION TUNING MULTI ROOM
MULTI JOG/ENTER
CONTROL ON/OFF
& SOURCE MULTI JOG CONTROL
SELECT
TUNER EDIT
1
OFF
ON AUTO
VIRTL SB OFF
VIRTL SB ON VIRTL SB AUTO
• You can’t use the VIRTUAL SUR-
ROUND BACK mode with the THX
CINEMA, MULTI CH IN,
STEREO/DIRECT modes.