Pioneer VSX-45TX - Manual (Page 91)

91
Fine Tuning Your System
EXPER
T
Assigning the Digital Inputs
If you did not hook up your digital equipment in accordance with the default settings for the digital inputs
(see pages 17,19 & 22–23) you need to complete the procedure below. You have to do this in order to tell
the receiver what digital equipment is hooked up to which terminal so the buttons on the remote corre-
spond to what you have hooked up.
(If you are continuing from page 89 you can skip the
first two steps.)
1 Turn on the receiver and your TV,
press RECEIVER on the remote
control.
2 Press the SYSTEM SETUP button.
3 Looking at the on-screen display on
your TV, use the
5∞ buttons to
select INPUT ASSIGN. Press the
ENTER button.
4 DIGITAL-IN SELECT should be
selected, if not use the
5∞ buttons
to select it. Press the ENTER button.
5 Use the
5∞ buttons to move
through the different digital inputs
and press the ENTER button.
6 Use the
5∞ buttons select the
component that you hooked up to
that digital in. Press the ENTER
button.
If you're not sure which component is connected to
which digital in, look on the back of the receiver and
check the cables you connected.
7 When you're finished use the
5∞
buttons to select EXIT and press
ENTER.
This exits the DIGITAL-IN SELECT mode.
8 Use the
5∞ buttons to select EXIT
and press ENTER. Then, use the
5∞
buttons to select EXIT and press
ENTER again.
This exits the SYSTEM SETUP mode and returns to
normal operation.
memo
• The possible digital inputs that can be assigned
are: DVD/LD, TV/SAT, VCR1, VCR2, CD, CD-R,
MD.
• If you assign a digital input to a certain function
(for example DVD/LD) then any digital inputs pre-
viously assigned to that function will automati-
cally be set to OFF. This is because one func-
tion cannot be assigned to two different places.
3
4
5
System Setup
[ 1. Surround Setup
[ 2. THX CINEMA Setup
[
3. Input Assign
[ 4. Function Rename
[ 5. PHONO/LINE Setup
[ 6. Multi Room
[ 7. 12V Trigger
[ Exit
]
]
]
]
]
]
]
]
3.Input Assign
[ Digital-In Select ]
[ Component-In Select ]
[Exit]
Digital-In Select
Digital-1 [ TV/SAT ]
Digital-2 [ DVD/LD ]
Digital-3 [ OFF ]
Digital-4 [ CD ]
[Exit]
VCR2 VIDEO CD MULTI OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1 TUNER RECEIVER
1 2
LOUDNESS TONE
3 4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+ 10 DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
¶
DTV ON/OFF DISP MODE
8 SUB TITLE
1
2
3-8
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE HI-BIT HI-SAMPLING SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
BAND MULTI JOG CONTROL
3-8 2