Paradyne 3161-B3 - Manual (Page 243)

E. SNMP MIB Objects
3160-A2-GB21-90 February 2001 E-29
Table E-1. SNMP MIB to Front Panel Command Cross-Reference (1 of 3)
Front Panel Command SNMP MIB Object
Stat–>DevHS:
LOS at NET
OOF at NET
Yellow at NET
AIS at NET
EER at NET
Read the dsx1LineStatus object for NET T1
dsx1LossOfSignal
dsx1LossOfFrame
dsx1RcvFarEnd
dsx1RcvAIS
dsx1OtherFailure
Stat–>DevHS:
LOS at DTE
OOF at DTE
Yellow at DTE
AIS at DTE
Read the dsx1LineStatus object for DTE T1
dsx1LossOfSignal
dsx1LossOfFrame
dsx1RcvFarEnd
dsx1RcvAIS
Stat–>Perf –>Telco–>Cur:
CurTimer
ES
UAS
SES
BES
CSS
Read the value in the following objects for NET T1
dsx1TimeElapsed
dsx1CurrentES
dsx1CurrentUAS
dsx1CurrentSES
dsx1CurrentBES
dsx1CurrentCSS
Stat–>Perf–>Telco–>Intvl–>Dsply:
ES
UAS
SES
BES
CSS
VldIntvl
Select the interval number with dsx1IntervalNumber. Read the
value in the following objects for NET T1
dsx1IntervalES
dsx1IntervalUAS
dsx1IntervalSES
dsx1IntervalBES
dsx1IntervalCSS
dsx1ValidIntervals
Stat–>Perf–>Telco–>24Tot:
VldIntvl
ES
UAS
SES
BES
CSS
Read the value in the following objects for NET T1
dsx1ValidIntervals
dsx1TotalES
dsx1TotalUAS
dsx1TotalSES
dsx1TotalBES
dsx1TotalCSS
Stat–>Tstat:
LLB Test Active
PLB Test Active
RLB Test Active
DLB Test Active
DCLB on Port
n
DTLB on Port n
1-8 Test Active
QRSS Test Active
QRSS on Port
n
511 on Port n
Monitoring QRSS
Mon QRSS, Port
n
Mon511, Port n
Read:
dsx1LineLoop from dsx1LoopbackConfig for Net T1
dsx1PayloadLoop from dsx1LoopbackConfig for Net T1
dsx1PayloadLoop from dsx1LoopbackConfig for DTE T1
dsx1LineLoop from dsx1LoopbackConfig for DTE T1
testFullDuplexLoopback from IfExtnsTestType for Port n
testLoopDTLB from IfExtnsTestType for Port n
dsx1SendOtherTestPattern from dsx1SendCode for Net T1
dsx1SendQRS from dsx1SendCode for Net T1
testSendQRSS from IfExtnsTestType for Port n
testSend511 from IfExtnsTestType for Port n
testMonQRSS from ifExtnsTestType for Net T1
testMonQRSS from ifExtnsTestType for Port n
testMon511 from ifExtnsTestType for Port n