Paradyne 3161-B3 - Manual (Page 296)

Index
IN-4 February 2001 3160-A2-GB21-90
M
maintenance
device health and status, 4-3
performance reporting, 4-5
power-up self-test, 2-10, 4-1
manager
SNMP, 1-3
master clock
functional description, 3-45
procedure for configuring, 3-47
messages
alarm
Performance Report, 4-9
Self-Test Health, 4-2
troubleshooting, 4-14
with ASCII terminal/printer, 1-2, 4-11
status
Performance Report, 4-9
Self-Test Health, 2-9, 4-2
Test Status, 4-37
MIBs, SNMP, E-1
MODEM Port
acquiring/releasing the user interface, 3-51
configuration option, C-24
functional description, 1-2, 1-7
physical description, 1-5–1-6
pin assignments, D-4
technical specifications, B-2
used with ASCII terminal/printer, 4-11
used with SNMP system, 3-20
Mon (Monitor) branch
example of use, 4-17
N
NET (Network) Configuration branch
example of use, 3-16
option table, C-8
option worksheet, C-42
network interface
cabling example, 2-8
channel allocation procedure, 3-29
configuration options, C-8
failure message, 4-2
front panel LED indications, 3-6
functional description, 1-7, 2-1
physical description, 1-5–1-6
pin assignments, D-1
technical specifications, B-2
troubleshooting, 4-14
O
objects
SNMP, 1-3, E-1
OOF (Out Of Frame) condition
ASCII terminal/printer message, 4-11
Device Health and Status message, 4-4
front panel LED indication, 3-6–3-7
Performance Report message, 4-9
troubleshooting, 4-14
options, strap. See configuration options
P
pattern tests, 4-30
payload loopback (PLB), 4-24
PBX applications, 2-2
PDV (Pulse Density Violation) condition, 3-7
Perf (Performance Report) branch
example of use, 4-6
performance reporting, 4-5, C-7
physical description of DSU/CSU, 1-3, B-2
pin assignments, D-1
Point-to-Point Protocol (PPP)
procedure for configuring, 3-23
used with SNMP system, 1-3, 2-3–2-4, 3-20, F-1
PORT (1-4) interface
channel allocation procedure, 3-29
configuration options, C-3
failure message, 4-2
front panel LED indications, 3-8
functional description, 1-7, 2-1
managed by SNMP, E-1
physical description, 1-5–1-6
pin assignments, D-8
technical specifications, B-2
Port Configuration branch
example of use, 3-18
option table, C-3
option worksheet, C-45
power input
cabling example, 2-8
connector, 1-5–1-7, D-15
consumption, B-1
optional power sources, 2-5, B-1, D-15
requirement, B-1
troubleshooting, 4-14
power module, 1-7, B-1
power-up self-test
displaying results, 4-1
front panel indications, 2-9, 3-6
troubleshooting, 4-14
problem determination. See troubleshooting
protocol
link layer, 3-19, 3-23
Ptrns (Test Patterns) branch
example of use, 4-30