Paradyne 3161-B3 - Manual (Page 154)

C. Configuration Options
C-10 February 2001 3160-A2-GB21-90
Channel Configuration Options
The Channel configuration options are divided into two tables as follows:
T DTE Channel Configuration Options ( Table C-4 )
T Data Port Channel Configuration Options ( Table C-5 )
NOTE:
Table C-4, DTE Channel Configuration Options , and Table C-5, Data Port
Channel Configuration Options , describe the DTE channel and data port
channel configuration options. The configuration options in Table C-4, DTE
Channel Configuration Options , only appear if the DTE Drop/Insert (DSX-1)
port is enabled and you are using a 2-port or 4-port DSU/CSU.
Circuit Ident:
Next Edit Clear Prev
Network Circuit Identifier. Specifies the transmission vendor’s circuit identifier for the
purpose of facilitating troubleshooting. The network circuit identifier is an ASCII text string
that may be up to 255 characters in length.
Edit – Allows you to edit and/or display the network circuit identifier using the generic text
string entry screen.
Clear – Allows you to clear the network circuit identifier. The network circuit identifier is set
to a null string.
Table C-3. Network Interface Configuration Options (3 of 3)