Snmp mib objects, Overview, E snmp mib objects – Paradyne 3161-B3 User Manual

Page 215: Appendix e, Snmp mib, Objects

Advertising
background image

3160-A2-GB21-90

February 2001

E-1

E

SNMP MIB Objects

Overview

This appendix describes the Management Information Base (MIB) objects that are
supported by the DSU/CSU and provides a correlation between front panel
commands and MIB objects (

Table E-1, SNMP MIB to Front Panel Command

Cross-Reference

).

The DSU/CSU supports the following MIBs:

T

MIB II (RFC 1213)

Defines the general objects for use in Transmission Control Protocol/Internet
Protocol (TCP/IP) internets and provides general information about the
DSU/CSU.

T

DS1/E1 MIB (RFC 1406)

Defines objects for managing DS1 interfaces and supports the network and
DTE Drop/Insert (DSX-1) interfaces on the DSU/CSU.

T

RS-232-like MIB (RFC 1317)

Defines objects for managing RS-232-type interfaces and supports
synchronous data ports (PORTs 1– 4) and management communication ports
(AUX, MODEM, and COM ports) on the DSU/CSU.

T

Generic-Interface MIB Extensions (RFC 1229)

An extension to MIB II that defines additional objects for control of generic
interfaces in MIB II. It supports control of tests on the DTE Drop/Insert
(DSX-1) and synchronous data interfaces that are not supported by other
MIBs.

T

Enterprise MIB

Defines objects that are unique to devices such as Model 316x DSU/CSUs.

Advertising
This manual is related to the following products: