Operation, Overview, Using the front panel – Paradyne 3161-B3 User Manual

Page 35: Chapter 3

Advertising
background image

3160-A2-GB21-90

February 2001

3-1

3

Operation

Overview

This chapter contains information for operating your DSU/CSU. It includes a
description of the front panel and sample procedures for configuring the
DSU/CSU.

NOTE:

Additional information for the carrier-mounted DSU/CSU is located in the
ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide

and

the COMSPHERE 3000 Series Carrier Installation Manual.

Using the Front Panel

The standalone DSU/CSU front panel (

Figure 3-1, Standalone DSU/CSU Front

Panel

) consists of an LCD, a keypad, test jacks, and 12 LEDs. The

carrier-mounted DSU/CSU faceplate contains test jacks and 12 LEDs, however,
the LCD and keypad are located on the Shared Diagnostic Control Panel (SDCP)
of the 3000 Series Carrier. For more information about the SDCP, refer to the
COMSPHERE 3000 Series Carrier Installation Manual.

NOTE:

You can display a graphical representation of the DSU/CSU front panel on an
attached PC (see

Appendix G, Front Panel Emulation

).

Advertising
This manual is related to the following products: