Paradyne 3161-B3 - Manual (Page 78)

3. Operation
3-44 February 2001 3160-A2-GB21-90
3. Line 1 displays the 24 DS0 channels for the DTE Drop/Insert (DSX-1)
interface. Pressing the or key scrolls the channels onto the screen in
groups of three. Line 2 displays whether the DS0 channel in Line 1 is a data
channel (Data) or a voice (RBS) channel. Each time that you press the
Function key located below the desired channel, the display in Line 2 toggles
between Data and RBS.
Clearing DS0 Channel Allocation
You can clear (deallocate) all the DS0 channels currently allocated to either the
network interface, the DTE Drop/Insert (DSX-1) interface, or the synchronous data
ports.
Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the Chan selection appears on
the screen.
5. Select Chan.
6. From the Channel Config screen, select Clear.
F1 F2 F3
D1 D2 D3
RBS RBS RBS
F1 F2 F3
Edit:
Port NET Chan
F1 F2 F3
Channel Config:
Dsply Clear DTE