Paradyne 3161-B3 - Manual (Page 94)

3. Operation
3-60 February 2001 3160-A2-GB21-90
Disconnecting the Modem Connection
The Disconnect command enables you to force a disconnect of an active modem
connection from the front panel of the DSU/CSU. This command is only available
when the DSU/CSU modem is connected.
Disconnect methods include:
T Using the Disconnect command via the front panel menu (for all dial
connections, or when a pass-through connection is established to another
316x DSU/CSU).
T Pressing and holding the and front panel keys simultaneously (when a
pass-through connection is established to a remote device other than a
316x DSU/CSU).
Procedure
To disconnect an established modem connection using the Disconnect command:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
4. From the Call Setup screen, select Disc.
The modem call is disconnected and the Command Complete screen
appears.
F1 F2 F3
Control:
Call Rel LED
F1 F2 F3
Call Setup:
Disc ChDir
F1 F2 F3
Disconnect:
Command Complete