Panasonic PT-D9610U - Manual (Page 32)

32
The table below lists the different types of analog RGB signals that can be input.
If a signal which differs greatly from any of the types listed below is input, the picture image may not be
displayed correctly, or black background may displayed.
Display mode name Signal data
No. of dots
Horizontal scanning frequency(kHz) Vertical scanning frequency(Hz)
Note: • The display resolution of this projector is 1 024 x 768 dots(PT-D9510U)/1 280 x 1 024 dots(PT-
D9610U) If the display resolution indicated in the above data exceeds this resolution, the resolution will
be converted to 1 024 x 768 dots(PT-D9510U)/1 280 x 1 024 dots(PT-D9610U).
• Display resolution follows by a “ i ” indicate interlace signals.
Analog RGB signals that can be input