Panasonic PT-D9610U - Manual (Page 7)

7
When using the projector
Do not look into the lens while the projector is being used.
• Strong light is emitted from the projector‘s lens. If you look directly into this light, it can hurt and damage your
eyes.
Do not place the projector on top of surfaces which are sloped or unstable.
• The projector may fall down or tip over.
Do not place any objects on top of the projector.
• If water spills onto the projector or foreign objects get inside it, a short-circuit may occur which could result in fire
or electric shocks. If any foreign objects get inside the projector, please consult an Authorized Service Center.
Do not stick any foreign objects into the projector.
• Do not insert any metal objects or flammable objects into the ventilation holes or drop them onto the projector, as
doing so can cause fire or electric shocks to occur.
Do not cover the air outlet.
• Doing so may cause the projector to overheat, which can cause fire or damage to the projector.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks are present inside the projector. For any inspection,
adjustment and repair work, please contact an Authorized Service Center.
Do not spill water on the projector.
• This can cause fire or electric shocks to occur.
Securely insert the power cord plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall
socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
• Doing so may cause electric shocks to occur.
Do not do anything that might damage the power cable.
• Do not damaged the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause fires and electric shocks to occur. If the
power cable becomes damaged, have it repaired at an Authorized Service Center.
Clean the power cable regularly to prevent it from becoming covered in dust.
• If dust builds up on the power cord plug, the resultant humidity can damage the insulation, which could result in
fire. Pull the power cord out from the wall outlet and wipe it with a dry cloth.
• If not using the projector for an extended period of time, pull the power cord plug out from the wall outlet.
If a problem occurs during use
If a problem occurs (such as no picture), or if smoke or an abnormal odor starts to come out from the
projector, immediately pull the power cord plug out from the wall outlet.
• If you continue to use the projector in this condition, fire or electric shocks could result. After checking that the
smoke has stopped coming out, contact an Authorized Service Center so that the necessary repairs can be
mode. Repairing the projector yourself is extremely dangerous, and it should never be done.
If water or foreign objects get inside the projector, if the projector dropped, or if the cabinet becomes
damaged, disconnect the power cord plug immediately.
• A short circuit may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need
to be made.
Caution!
• Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens
there is a injury hazard.