Panasonic PT-D9610U - Manual (Page 82)

82
Network setting page
Select ON to activate
DHCP client function
Input IP address when
not using DHCP server
Input port number.
Normally, this is used
with the default 80.
Input net mask when
not using DHCP server
Input gate address
when not using DHCP
server
Input projector name.
Input the host name, if
necessary, when using
DHCP server etc.
Projector control page
This displays the
projector state.
This displays the
projector on-screen.
The display appears
even if projector on-
screen is set to off.
The on-screen at the
right side of the control
page is updated to the
most current state. The projector is controlled by
pressing these buttons. After
control, the on-screen at the right
side of the control page is
updated.