Planet Technology WGSW-48040 - Manual (Page 129)

User’s Manual of WGSW-24020/WGSW-48040
-12
The page contains the following fields:
Authentication Type
Defines the user authentication methods. Also you can choose combinations of all
the authentication methods. The possible field values are:
• Local, authenticates the user at the device level. The device checks the user
name and password for authentication.
• RADIUS, where authenticates the user at the RADIUS server.
• TACACS+, which authenticates the user at the TACACS+ server.
• None, assigns none authentication method to the authentication profile.
User Name
Displays the user name.
Password
Specifies the new password. The password is not displayed. As it entered an “*”
corresponding to each character is displayed in the field. (Range: 1-159 characters)
Confirm Password
This confirms the new password. The password entered into this field must be
exactly the same as the password entered in the Password field.
Use the button when you want to add the user configuration to the Local User’s Table.
4.12.2 Static Address
A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and
cannot be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the
address table (see figure 4-71).
Figure 4-71 Static Address screen