18 show ports security, Example, Command mode – Planet Technology WGSW-48040 User Manual
Page 171: User guidelines, Syntax, Default configuration
User’s Manual of WGSW-24020/WGSW-48040
-17
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the multicast configuration for VLAN 1 is displayed.
console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Forward-All
Port Static Status
--------- ------------ -----------
e1 Forbidden Filter
e2 Forward Forward(s)
e3 - Forward(d)
5.4.18 show ports security
The show ports security privileged EXEC command displays the port-lock status.
Syntax
show ports security
[ethernet interface | port-channel port-channel-number]
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed.
console# show ports security