27 vlan commands, 1 vlan database, 2 vlan – Planet Technology WGSW-48040 User Manual

Page 333: Syntax, Default configuration, Command mode, User guidelines, Example

Advertising
background image

User’s Manual of WGSW-24020/WGSW-48040

-33

Current privilege level is 15

5.27 VLAN Commands

5.27.1 vlan database

The vlan database global configuration command enters the VLAN configuration mode.

Syntax

vlan database

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enters the VLAN database mode.

Console (config)# vlan database

Console (config-vlan)#

5.27.2 vlan

Use the vlan interface configuration (VLAN) command to create a VLAN. To delete a VLAN, use the no form of this command.

Syntax

vlan

{vlan-range}

no vlan

{vlan-range}

ƒ

vlan-range — A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN IDs separated by commas

(without spaces); use a hyphen to designate a range of IDs. (Range: 2 - 4063)

Advertising
This manual is related to the following products: