Planet Technology WGSW-48040 - Manual (Page 15)

User’s Manual of WGSW-24020/WGSW-48040
-15-
1.3 Product Feature
¾ Physical Port
WGSW-24020
24-Port 10/100/1000Base-T RJ-45
2 SFP slots, shared with Port#12 and Port#24
Console interface for Switch basic management and setup
WGSW-48040
48-Port 10/100/1000Base-T RJ-45
4 SFP slots, shared with Port#23, Port#24, Port#47 and Port#48
Console interface for Switch basic management and setup
¾ Layer 2 Features
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
Supports Auto-negotiation and half duplex/full duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports.
Auto-MDI/MDI-X detection on each RJ-45 port
Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous
packets to optimize the network bandwidth
8K MAC address table, automatic source address learning and ageing
6Mbit embedded memory for packet buffers
Supports IEEE 802.1Q Tagged based VLAN
GVRP protocol for VLAN Management
Support up to 8 Trunk groups, each trunk for up to maximum 8 port with 1.6Gbps bandwidth (Duplex Mode)
IEEE802.1d, IEEE802.1w, classic Spanning Tree Algorithm or Rapid Spanning Tree support
Supports the IEEE 802.1s specification for multiple spanning trees on a single port (spanning tree per VLAN).
¾ Quality of Service
4 priority queues on all switch ports.
Support for strict priority and weighted round robin (WRR) CoS policies
Support QoS and bandwidth control on each port
Traffic-policing policies on the switch port
¾ Multicast
Support IGMP Snooping v1 and v2
Port Mirroring to monitor the incoming or outgoing traffic on a particular port
¾ Security
802.1x Port-Based Authentication
IP-Based Access Control List (ACL)
MAC-Based Access Control List
Port Security