Planet Technology WGSW-48040 - Manual (Page 115)

User’s Manual of WGSW-24020/WGSW-48040
-11
4.10.2 Bridge Multicast
The Bridge Multicast screen (see figure 4-58) displays the ports and LAGs attached to the Multicast service group in the Ports
and LAGs tables. The Port and LAG tables also reflect the manner in which the port or LAGs joined the Multicast group. Ports
can be added either to existing groups or to new Multicast service groups.
This screen permits new Multicast service groups to be created, also assigns ports to a specific Multicast service address group,
and included two areas, Configuring Multicast and Multicast Table.
Figure 4-58 Bridge Multicast screen
The Page contains the following fields:
„ Configure Multicast
Enable Bridge
Multicast Filtering
The check box allows enabling Bridge Multicast Filtering function.
VLAN ID
This identifies a VLAN to be configured to a Multicast service.
Bridge Multicast
Address
Identifies the Multicast group MAC address/IP address.
Interface
Displays Interface that can be added to a Multicast service.
The configuration options are as follows:
• Static, indicates the port is user-defined.
• Dynamic, indicates the port is configured dynamically.
• Forbidden, forbidden ports are not included the Multicast group, even if IGMP
snooping designated the port to join a Multicast group.
• None, displays the port is not configured for Multicast service.