Planet Technology WGSW-48040 - Manual (Page 126)

User’s Manual of WGSW-24020/WGSW-48040
-12
4.11.7 Notification Recipient
The Notification Recipient screen (see figure 4-68 and 4-69) contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent.
Figure 4-68 Notification Recipient
The page contains the following fields:
Recipient IP
Which indicates the IP address to whom the traps are sent.
Notification Type
Defines the notification sent. The possible field values are:
Traps, indicates traps are sent.
Informs, indicates informs are sent.
SNMP v1.2
Enables SNMP v1.2 as the Notification Recipient. Either SNMP v1.2
or SNMPv3 can be enabled at any one time, but not both at the same
time. If String and Notification Version fields are enabled for
configuration:
• Community String, where identifies the community string of the
trap manager.
• Notification Version, determines the trap type. The possible
field values are:
ƒ SNMP V1 , which indicates SNMP Version 1 traps are sent.
ƒ SNMP V2 , which indicates SNMP Version 2 traps are sent.
SNMP V3
This enables SNMPv3 as the Notification Recipient. Either SNMPv1.2
or SNMP V3, enabled at any one time, but not both at the same time.
If SNMP V3, which is enabled, the User Name and Security Level
fields are enabled for configuration:
• User Name - defines the user to whom SNMP notifications are
sent.
Security Level
Defines the means by which the packet is authenticated. The possible
field values are:
• No Authentication. Indicates the packet is neither authenticated
nor encrypted.