Planet Technology WGSW-48040 - Manual (Page 152)

User’s Manual of WGSW-24020/WGSW-48040
-15
User Guidelines
Changing login authentication from default to another value may disconnect the telnet session.
Example
The following example specifies the default authentication method for a remote Telnet or console.
console (config) # line cnsole
console (config-line) # login authentication default
5.3.4 enable authentication
The enable authentication line configuration command specifies the authentication method list when accessing a higher
privilege level from a remote telnet or console. To return to the default specified by the enable authentication command, use
the no form of this command.
Syntax
enable authentication {default | list-name}
no enable authentication
ƒ default — Uses the default list created with the authentication enable command.
ƒ list-name — Uses the indicated list created with the authentication enable command.
Default Configuration
Uses the default set with the command authentication enable.
Command Mode
Line Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing a higher privilege level from a remote Telnet
or console.
console (config) # line cnsole
console (config-line) # enable authentication default