Planet Technology WGSW-48040 - Manual (Page 158)

User’s Manual of WGSW-24020/WGSW-48040
-15
5.3.11 show users accounts
The show users accounts privileged EXEC command displays information about the local user database.
Syntax
show users accounts
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the local users configured with access to the system.
console (config)# show users accounts
Username Privilege
--------------- -------------
Bob 15
Robert 15
5.4 Address Table Commands
5.4.1 bridge address
The bridge address VLAN interface configuration command adds a static MAC-layer station source address to the bridge table.
To delete the MAC address, use the no form of the bridge address command (using the no form of the command without