5 bridge multicast forward-unregistered, 6 bridge multicast forbidden forward-unregistered, Examples – Planet Technology WGSW-48040 User Manual

Page 162: Syntax, Default configuration, Command modes, User guidelines

Advertising
background image

User’s Manual of WGSW-24020/WGSW-48040

-16

Examples

In this example the MAC address 0100.5e02.0203 is forbidden on port g9 within VLAN 8.

console (config)# interface vlan 8

console (config-if)# bridge multicast address 0100.5e02.0203

console (config-if)# bridge multicast forbidden address 0100.5e02.0203 add ethernet e9

3.4.5 bridge multicast forward-unregistered

The bridge multicast forward-unregistered interface configuration command enables forwarding unregistered multicast

addresses. Use the no form of this command to return to default.

Syntax

bridge multicast forward-unregistered

{add | remove} {ethernet interface-list | port-channel port-channelnumber-list }

no bridge multicast forward-unregistered

ƒ

add — Force forwarding of unregistered multicast packets.

ƒ

remove — Don’t force forwarding of unregistered multicast packets.

ƒ

interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; use a hyphen to designate a

range of ports. (Range: Valid Ethernet port)

ƒ

port-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces; use a hyphen to

designate a range of port-channels. (Range: Valid Port-channel number)

Default Configuration

Forward

Command Modes

Interface configuration (VLAN) mode

User Guidelines

If routers exist on the VLAN, do not change the unregistered multicast addresses state to drop on the routers

ports.

Examples

This example enables forwarding unregistered multicast addresses within VLAN 8.

console (config)# interface vlan 8

console (config-if)# bridge multicast forward-unregistered add ethernet 1- 9

5.4.6 bridge multicast forbidden forward-unregistered

The bridge multicast forbidden forward-unregistered interface configuration command forbids a port to be a

Forwarding-unregistered-multicast-addresses port. Use the no form of this command to return to default.

Advertising
This manual is related to the following products: