Planet Technology WGSW-48040 - Manual (Page 184)

User’s Manual of WGSW-24020/WGSW-48040
-18
Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3
5.5.17 show sntp status
The show sntp status Privileged EXEC command shows the status of the Simple Network Time Protocol (SNTP),
Syntax
show sntp status
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Preference Status Last response Offset Delay
[mSec] [mSec]
----------- ----------------- ----------- ---------------------- ----------- ------------
176.1.1.8 Primary Up AFE252C1.6DBDDFF2 7.33 117.79
176.1.8.179 Secondary Unknown AFE21789.643287C9 8.98 189.19
Broadcast:
Interface IP address Last response
------------- ----------------- ------------------------
176.1.1.8 Primary AFE252C1.6DBDDFF2