Planet Technology WGSW-48040 - Manual (Page 252)

User’s Manual of WGSW-24020/WGSW-48040
-25
6 Disable N/A N/A
7 Enable 178000 8000
8 Enable 23000 1000
The following example displays output from the show qos interface g1 policers command
Console# show qos interface ethernet g1 policers
Ethernet g1
Class map: A
Policer type: aggregate
Committed rate: 192000 bps
Committed burst: 9600 bytes
Exceed-action: policed-dscp-transmit
Class map: B
Policer type: single
Committed rate: 192000 bps
Committed burst: 9600 bytes
Exceed-action: drop
Class map: C
Policer type: none
Committed rate: N/A
Committed burst: N/A
Exceed-action: N/A
5.17.7 qos map dscp-queue
The qos map dscp-queue global configuration command modifies the DSCP to queue map. To return to the default map, use
the no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
• dscp-list —Specify up to 8 DSCP values, separate each DSCP with a space. (Range: 0 - 63)
• queue-id —Enter the queue number to which the DSCP value corresponds.
QoS Commands
qos trust (Global)
Copyright © 2004 Marvell CONFIDENTIAL Doc. No. MV-S200005-00 Rev. C
January 19, 2004, Preliminary
Document Classification: Proprietary Information Page 147