Planet Technology WGSW-48040 - Manual (Page 32)

User’s Manual of WGSW-24020/WGSW-48040
-32-
4.2.2 Network Settings
The Basic Setup Table include the Network Settings (see figure 4-7), which allows you to assign DHCP or static IP settings to
interfaces and assign default gateways. In the Networking Setting screen, you can set these parts as below:
Figure 4-7 Switch Network Setting screen
The page includes the following fields:
„ Identification:
System Name Input the system name.
System Location Input the location where the Switch is located.
System Contact Input the administrative contact person.
System Object ID The system object identifier is in this field.
Base MAC Address Display the MAC address of the Switch.
„ IP Configuration:
Management VLAN
Allow to select the Management VLAN, the default Managemanet VLAN is VLAN 1.
IP Address Mode
Where select Static or Dynamic IP address configuration, the Default Mode is Static.
Host Name
This field allows input the DHCP Host Name.
IP Address
Allow input the IP address for a static address, the default IP Address is
192.168.1.254
.