Planet Technology WGSW-48040 - Manual (Page 355)

User’s Manual of WGSW-24020/WGSW-48040
-35
Examples
The following example enables periodic re-authentication of the client.
Console (config)# interface ethernet e8
Console (config-if)# dot1x re-authentication
5.29.5 dot1x timeout re-authperiod
The dot1x timeout re-authperiod interface configuration command sets the number of seconds between reauthentication
attempts. Use the no form of this command to return to the default setting.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
ƒ seconds — Number of seconds between re-authentication attempts. (Range: 300 - 4294967295)
Default Configuration
3600
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the number of seconds between re-authentication attempts, to 3600.
Console (config)# interface ethernet e8
Console (config-if)# dot1x timeout re-authperiod 3600
5.29.6 dot1x re-authenticate
The dot1x re-authenticate privileged EXEC command manually initiates a re-authentication of all 802.1Xenabled ports or the
specified 802.1X-enabled port.
dot1x re-authenticate [ethernet interface]
ƒ interface — The full syntax is: unit/port.