Planet Technology WGSW-48040 - Manual (Page 364)

User’s Manual of WGSW-24020/WGSW-48040
-36
EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 0008.3b79.8787
The following table describes the significant fields shown in the display:
Field Description
EapolFramesRx The number of valid EAPOL frames of any type that have been received by this
Authenticator.
EapolFramesTx The number of EAPOL frames of any type that have been transmitted by this
Authenticator.
EapolStartFramesRx The number of EAPOL Start frames that have been received by this Authenticator.
EapolLogoffFramesRx The number of EAPOL Logoff frames that have been received by this Authenticator.
EapolRespIdFramesRx The number of EAP Resp/Id frames that have been received by this Authenticator.
EapolRespFramesRx The number of valid EAP Response frames (other than Resp/Id frames) that have
been received by this Authenticator.
EapolReqIdFramesTx The number of EAP Req/Id frames that have been transmitted by this Authenticator.
EapolReqFramesTx The number of EAP Request frames (other than Rq/Id frames) that have been
transmitted by this Authenticator.
InvalidEapolFramesRx The number of EAPOL frames that have been received by this Authenticator in which
the frame type is not recognized.
EapLengthErrorFramesRx The number of EAPOL frames that have been received by this Authenticator in which
the Packet Body Length field is invalid.
LastEapolFrameVersion The protocol version number carried in the most recently received EAPOL frame.
LastEapolFrameSource The source MAC address carried carried in the most recently received EAPOL frame.
5.29.15 dot1x auth-not-req
The dot1x auth-not-req interface VLAN configuration command enables unauthorized users access to that VLAN. Use the no
form of this command to disable the access.
Syntax
dot1x auth-not-req