Planet Technology WGSW-48040 - Manual (Page 84)

User’s Manual of WGSW-24020/WGSW-48040
-84-
„ CoS Default:
The Table contains the following fields:
Interface
Interface to which the CoS configuration applies.
Default CoS
Determines the default CoS value for incoming packets for which a VLAN tag is not
defined. The possible field values are 0-7.
The default CoS is 0.
Restore Defaults
Restores the device factory defaults for mapping CoS values to forwarding queue.
LAG
LAG to which the CoS configuration applies.
4.8.2 Queue Setting
The Queue Setting screen (see figure 4-38) contains fields for defining the QoS queue forwarding types.
Figure 4-38 Queue Setting screen
The page contains the following fields:
Strict Priority
This indicates that traffic scheduling for the selected queue is based strictly on the
queue priority.
WRR
This indicates that traffic scheduling for the selected queue is based strictly on the
WRR.
Queue
Shows the queue for which the queue settings are displayed.
The possible field range is 1 - 4.
WRR Weight
This displays the WRR weights to queues.
Default Rate 1:2:4:8