Pioneer Super Tuner III D DVH-P5850MP - Manual (Page 15)

Black plate (15,1)
<CRB2123-A/U>15
Using the remote control
operation mode switch
There are two remote control operation modes
on the remote control. If you want to operate
this unit by remote control, turn the mode
switch to DVH mode. In this case, both the
head units buttons and remote control can
control this unit.
DVH mode operation
When operating this unit by remote control,
the mode is normally switched to DVH.
! It is possible to use the r/q/m /n
buttons on the remote control to perform
the same operations as the a/b/c/d but-
tons on the head unit.
! Numbers (16) can perform the same op-
erations as 16 buttons on the head unit.
 If you want to select a disc located at 7
to 12 by using buttons 16, press and
hold the corresponding numbers, such
as 1 for disc 7, until the disc number ap-
pears in the display.
DVD mode operation
If you switch the mode to DVD, the joystick
and NUMBER operations are changed for
DVD player.
% When you want to operate the follow-
ing functions, switch the mode to DVD:
! When operating the DVD menu by using
the joystick. (Refer to Basic operation of DVD
video on page 21.)
! When operating the PBC menu by using
NUMBER. (Refer to Watching a Video CD on
page 29.)
! When specifying title or track by using
NUMBER. (Refer to Specifying title on page
22 and Specifying track on page 30.)
Note
If the remote control is set to DVH mode, o
and p are assigned to other functions. Use
m and n instead for the DVD mode functions
controlled by o and p.
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source, the unit is turned
on.
Selecting a source
You can select a source you want to listen to. If
DSC-A is turned on, load a disc in the unit to
switch to DVD (refer to Switching the auto-
matic disc playback on page 82).
% Press SOURCE to select asource.
Press SOURCE repeatedly to switch between
the following sources:
TUNER (tuner)TV (television)AV (video
input)DVD (built-in DVD player)S DVD
(DVD player/multi-DVD player)MULTI CD
(multi-CD player)EXT (external unit 1)EXT
(external unit 2)AUX (AUX)
Notes
! In the following cases, the sound source will
not change:
 When there is no unit corresponding to the
selected source connected to this unit.
 When there is no disc in the unit.
 When there is no disc in the DVD player.
 When there is no magazine in the multi-
CD player.
 When there is no magazine in the multi-
DVD player.
Basic Operations
En
15
Section
04
Basic
Operations