Pioneer KURO PRO-141FD - Manual (Page 16)

16
En
02 Install Your Flat Panel Display
Follow the steps below to secure your flat panel display.
1 ) Mark locations for metal fittings and screws on the back edge of the table using the panel stand to determine
placement.
2 ) Drill holes in the table or platform edge at the marked locations.
3 ) Lift panel into place with the assistance with at least one other person.
4 ) Use wood screws (not included) to secure the metal fittings to the table.
Falling prevention
metal fitting
(supplied with the
optional stand)
Wood screw
(commercially
available, 4 mm x
20 mm (5/32 inch x
13/16 inch) min.)
(PRO-141FD)
PRO-141FD_PRO-101FD.book Page 16 Monday, May 12, 2008 3:27 PM