Pioneer KURO PRO-141FD - Manual (Page 71)

71
En
Use Other Equipment With Your Flat Panel Display 06
3 ) Press and hold DISPLAY for at least three seconds while the screen in Step 2 remains visible.
Only input signals appear.
4 ) Press HOME MENU while the screen in Step 3 remains visible but do not hold the button down.
The panel switches to Integrator Mode.
Note: Pressing and holding or pressing HOME MENU long causes the panel to remain in User Mode.
6.10.1 Explore the Integrator Mode Menus
Picture Preset
Use this option to preset the Picture adjustment values for the Home Menu.
Studio Mode
In addition to normal adjustment values, the panel also provides a separate professional adjustment mode
optimum for retake at a TV studio (Studio).
Notes: This setting applies to all input sources.
Entering Monotone Mode, AV Selection or Blue Only Mode is unavailable while in Studio Mode.
Monotone Mode
Monotone Mode cuts the video signal’s color components so that images appear using only luminance signals.
Notes: This setting applies to all input sources.
Entering Studio Mode, AV Selection or Picture Preset is unavailable while in Monotone Mode.
Parameter Description
On switches to the Studio Mode
Off* No effect
*Factory default
Parameter Description
On switches to the Monotone Mode
Off* No effect
*Factory default
INPUT2
Picture
Studio Mode : Off
Picture Preset
Monotone Mode : Off
Drive Mode : 1
FRC Mode : Default
Translucent : Off
Banner PIP : Off
Mirror Mode : Off
Banner PIP
Power On Mode
Power On Mode (Input)
Input : Last
Option
Fan
Control : Auto
OSD Display : On
Network ID Beacon : Off
IP Control Look : Off
Factory Default
INTEGRATOR MENU
Exit
PRO-141FD_PRO-101FD.book Page 71 Monday, May 12, 2008 3:27 PM