Pioneer KURO PRO-141FD - Manual (Page 68)

68
En
06 Use Other Equipment With Your Flat Panel Display
Event Notification
Your flat panel display can provide E-mail notification if there is a system error or malfunction.
Note: Your flat panel display does not have a function that determines the name of network computer within the
Internet. Enter your mail server’s IP Address in the Mail server (SMTP) box. If the IP Address is now known,
use such a search program as the “nslookup” on your PC.
Option Description
Sender address enters the sender’s address
Mail server (SMTP) enters the sender server’s IP address
Authentication sets whether to authenticate when sending an E-
mail (Pop before SMTP is set for the authentication
method)
ID enters an authentication ID
Password enters a password for authentication
Received address (1) - (3) enters the recipient address
Event option
Power down sends an E-mail when the fail-safe function is
activated due to a panel error that may cause a
malfunction
Shut down sends an E-mail when the protection function turns
the panel off automatically
Usage time sends an E-mail at a specified interval (every 500
hours if set to “500”)
Input change sends an E-mail when the input mode changes
Loss of input signal sends an E-mail when no input signal appears
Power toggle sends an E-mail when the power status changes
Model : ******
Name : ******
Location : ******
******
Top
Picture
Terminal
Functions
Network
E-mail
ISF
Detail Settings
Network Settings
E-mail
Web control system
Set TEST MAIL
Sender address :
Mail server(SMTP) :
Event option :
Received address (1) :
Received address (2) :
Received address (3) :
Password :
ID :
Authentication : ON OFF
Power down ... Panel error
Shut down ... Temp.,speaker and fan error
Input change
Loss of input signal
Power toggle
Usage time ... Every hours 1000
PRO-141FD_PRO-101FD.book Page 68 Monday, May 12, 2008 3:27 PM