3 use hdmi inputs, 1 enter an hdmi input name – Pioneer KURO PRO-141FD User Manual
Page 54
54
En
06
Use Other Equipment With Your Flat Panel Display
6.3
Use HDMI Inputs
High Definition Multimedia Interface (HDMI) is a communication method commonly used by digital and/or
high definition equipment. Your flat panel display’s INPUT 5, INPUT 6, INPUT 7, INPUT 8 are HDMI terminals for
incoming digital video signals. The flat panel display supports KURO LINK functions so that when a piece of
equipment is connected, the panel can control the equipment. To use an HDMI terminal, specify the video signal
types being sent from the connected equipment. For signal types, see the operating manual(s) that came with the
equipment.
One of the benefits of using your flat panel display to control other equipment is the support of Deep Color. Deep
Color is the color depth that describes the number of bits used to represent the color of a single pixel in a bitmapped
image. Besides the conventional RGB/YCbCr16bit/20bit/24bit signals, the flat panel display also supports RGB/
YCbCr30bit/36bit signals. This feature enables finer color reproduction when connecting a device that supports Deep
Color signals (HDMI1.3 Deep Color). The color depth appears on the InfoBanner if a program supports Deep Color.
With INPUT 5 through INPUT 8 selected, the color depth also appears on the Display screen.
When connecting a PC to one of the panel’s HDMI inputs, use an HDMI-compliant PC or video card. For a PC or
AV equipment that has a DVI output terminal, use INPUT 4 on your flat panel display. In this case, use only a DVI-
D24 (digital) for connections (see page 17).
6.3.1
Enter an HDMI Input Name
To enter an input name for each piece of equipment connected through HDMI, follow the directions below.
1 ) Select the Input for the connected equipment.
Press the INPUT button (remote control or panel) until the correct input is showing (INPUT 5, INPUT 6,
INPUT 7, or INPUT 8).
2 ) Access
Input Setup 2/2 through the Input Setup menu.
3 ) Select
INPUT 5(HDMI 1), INPUT 6(HDMI 2), INPUT 7(HDMI 3) or INPUT 8(HDMI 4).
4 ) Select
HDMI 1 through HDMI 4, Blu-Ray, DVD, DVR, VCR, Cable, Satellite, GAME or Computer.
5 ) Press EXIT to close the menu.
INPUT 5 (HDMI 1)
Input Name
:
HDMI 1
Signal Type
:
Video
Video
:
Auto
Signal Format
:
Auto
INPUT 6 (HDMI 2)
Input Name
:
HDMI 2
Signal Type
:
Video
Video
:
Auto
Signal Format
:
Auto
INPUT 7 (HDMI 3)
Input Name
:
HDMI 3
Signal Type
:
Video
Video
:
Auto
Signal Format
:
Auto
INPUT 8 (HDMI 4)
Input Name
:
HDMI 4
Signal Type
:
Video
Video
:
Auto
Signal Format
:
Auto
Input Setup 2/2
Exit
PRO-141FD_PRO-101FD.book Page 54 Monday, May 12, 2008 3:27 PM