Phonetics 1104 - Manual (Page 103)

Appendix A: Troubleshooting
91
b
)
Recognition time setting is too long.
a)
Batteries are either incorrectly installed or drained.
3.
The Model 1104 does not recog- nize power failure.
T
o
v
erify proper battery function, unplug the
unit and verify continued operation using batteries only
. If unit ceases to function,
first try reinstalling the batteries. If this is not successful, replace the batteries. Refer to Chapter 2, Section 2.4 for complete instructions. Reprogram Recognition
T
ime. Set the
Recognition
T
ime to the minimum required
for a monitored condition to become a valid alarm. If possible, test the condition by deliberately creating an alert condition. Refer to Chapter 5, Section 5.3.
a)
Inputs for alarm are disabled.
4.
The Model 1104 does not recognize any alarm.
Enable the inputs for alarm. Refer to Chapter 5, Section 5.2.
b
)
Programmed Recognition
T
ime is too
long.
Reprogram Recognition
T
ime. Set the
Recognition
T
ime to the minimum required
before a valid alarm occurs. If possible, test the condition by deliberately creating an alert condition. Refer to Chapter 5, Section 5.9.