Phonetics 1104 - Manual (Page 54)

Sensaphone ® Model 1104 User’s Manual
42
4.11 Intercall Time
The Intercall Time is the programmable period of time the
Model 1104 waits in calling subsequent telephone numbers.
Intercall Time is activated only after alarm dial-out to the first
telephone number fails to be acknowledged. This period can
be programmed from 10 seconds to 60 minutes. The default
intercall time is 1 minute.
If an incoming telephone call is made to the Model 1104 during
Intercall Time (in between its dialing of subsequent telephone
numbers to report an alarm), it will answer the incoming call
and immediately report any existing alarms. The manner in
which the incoming call is answered depends upon whether or
not TAD is enabled or disabled:
• If TAD (Telephone Answering Device) is enabled,
Rings Until Answer will be 1.
• If TAD is disabled, Rings Until Answer will be 10.
Refer to Section 4.5, Rings Until Answer, and Section 4.6,
TAD (Telephone Answering Device).
4.11.1 Programming Inter call Time
To program Intercall Time:
1. Press SET.
2. Press INTERCALL TIME.
3
INTERCALL
TIME
The Model 1104 will respond: “Enter minutes.”
3. Using the number keys, enter the minutes.
The Model 1104 recites the digits as you press them.