Panasonic BB-HCM403A User Manual

Page 116

Advertising
background image

Operating Instructions

116

8.

After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].

If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 114–115.

9.

Click [Save] after confirming the settings.

The new settings are saved.

When finished, "Success!" is displayed.

Note

If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.

10.

Click [Go to Trigger page].

The Trigger page is displayed.

Note

If you set a short interval when transferring images to a cell phone, many E-
mails will be sent, which may lead to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per minute frequency is
recommended.

Motion Detection transfer stops operating until after the camera finishes all
transfers. For example, if the camera transfers 3 images per minute and 6
images in total, Motion Detection will follow the pattern below.

Setting

Description

Disable

The camera does not send an E-mail notification when
buffering or transferring images.

Enable

The camera sends an E-mail notification (up to 3
destinations) when buffering or transferring images.

Detectable

Detectable

Undetectable

1st

2nd 3rd

4th

5th

6th

120 seconds

A Motion Detection signal is detected.

Advertising