Panasonic BB-HCM403A - Manual (Page 16)

Operating Instructions
16
• The refresh interval may change depending on the network condition, PC
performance and what object you view. SD memory recording, using IPsec or
enabling Motion Detection will also increase the refresh interval.
• When displaying video (Motion JPEG), the camera allows up to 30
simultaneous accesses. The 31st user trying to access will see a gray screen.
The Buffered Image page is also limited to a maximum of 30 simultaneous
accesses.
• To reduce the data traffic, the video can be automatically changed to refreshing
still images on the General User page (see page 80).
• To display the Single Camera page directly, add it to the [Favorites] on the web
browser.
• To view dark images, enable color night view mode on the Camera Setup page
(see page 70). The image will be brighter, but the refresh interval may increase
(1 frame a second at maximum) and image quality may decrease in a dark
place. (See page 70).
• The following error messages can be displayed.
Error Message Cause and Remedy
The operation time has
ended. Images cannot be displayed outside the Operation
Time (see page 137).
The maximum number of
accesses has been
exceeded. The camera allows a maximum of 30 simultaneous
accesses when the Refresh Interval is set to [Motion]
and when accessing the Buffered Image page. Users
who try to access the camera when the maximum
number of access has already be reached will see a
gray screen. To view camera images, wait, then click
the Refresh button on your browser. If viewing the
Single Camera page, you can also switch to still
images.