Panasonic BB-HCM403A - Manual (Page 24)

Operating Instructions
24
1.4.7 Setting the Home Position (the administrator only)
Registering the Home Position
The home position is the position that the camera moves to when the power is
turned on. The administrator can register one position for the home position.
Viewing the Home Position
Note
• Registering and operating the home position is not available when using the
Network Camera Recorder and Wireless Camera Monitoring System.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without
saving changes.
2. Tilt the camera to a desired position.
3. Press the Home Position button.
4. Click [Save] to register, or click
[Back] and [Cancel] to cancel.
• If "Success!" is displayed, the
position has been registered
successfully. Click [Back].
1. Press the Home Position button.
• The camera moves to that
position and the image is
displayed.
Home
Position
Program