Panasonic BB-HCM403A User Manual
Page 56
Advertising
Operating Instructions
56
•
Set up the IPsec policy as below.
9.
Access the camera (see page 11).
•
If you can access the camera, the IPsec setup is complete.
Note
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
•
If you cannot communicate using IPsec, see page 23 of Troubleshooting
on the CD-ROM.
•
See the Panasonic Network Camera support website at
for IPsec features.
Items
Settings
Protocol
ANY
Source Network
Network address and subnet mask on the LAN side of
the VPN router
Source IP address
A global address on the WAN side of the VPN router
Destination Network
A global address of the camera
Destination IP address
A global address of the camera
Advertising