Connecting and setting up – Panasonic DMR-E20 User Manual
Page 10
10
Connecting and Setting up
If you are connecting your unit to a television with [Q Link]
°
1
, follow these steps. (For Continental Europe)
Begin here also if you have a television with [DATA LOGIC]
°
2
, [Easy Link]
°
3
, [Megalogic]
°
4
or [SMARTLINK]
°
5
and a 21-pin Scart socket.
For details, also read your television’s operating instructions.
(1) AV1 21-pin Scart socket
(2) Aerial Input socket
(3) Aerial Output socket
(4) Aerial (not supplied)
(5) Aerial lead (not supplied)
(6) TV equipped with the Q Link (not supplied)
(7) Aerial Input socket
(8) 21-pin Scart socket
(9) RF Coaxial cable (supplied)
(10)Fully-wired 21-pin Scart cable (not supplied)
Hints:
≥Q Link offers a range of convenient functions. For example, downloading of the tuning positions of all available television stations into your
unit’s memory if you connect the unit to your television with a fully wired 21-pin Scart cable (not supplied). Features similar to Q Link have
different names and may not work the same.
°
1
[Q Link] is a registered trademark of Panasonic.
°
2
[DATA LOGIC] is a registered trademark of Metz.
°
3
[Easy Link] is a registered trademark of Philips.
°
4
[Megalogic] is a registered trademark of Grundig.
°
5
[SMARTLINK] is a registered trademark of Sony.
For details, refer to your television’s operating instructions or consult your dealer.
≥Unlike in most commercially available 21-pin Scart cables, all 21 pins of one plug on a fully wired 21-pin Scart cable are connected to the
matching pins on the other end of the cable.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)