Panasonic DMR-E20 - Manual (Page 71)

71
Upgrading your system (continued)
Connecting a video cassette recorder [E]
When connecting to the AV3/DV input terminals on the
front of the unit
Audio/Video cable
(1) Yellow (VIDEO)
(2) White (L)
(3) Red (R)
(4) S video cable(not supplied)
(5) Audio/Video cable(not supplied)
(6) 4-pin DV cable(not supplied)
(7) Other playback equipment
≥Connect to the video and audio output terminals.
Note
If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
When connecting to the input terminals on the rear of
the unit
Audio/Video cable
(1) Yellow (VIDEO)
(2) White (L)
(3) Red (R)
Rear panel of this unit
(4) S video cable(not supplied)
(5) Audio/Video cable(not supplied)
(6) Other playback equipment
≥Connect to the video and audio output terminals.
Note
If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not supplied).
(1)
(2)
(3)
(1)
(2)
(3)
S-VIDEO IN AUDIO IN VIDEO IN – R L/MONO –
REC MODE
/I
REC
DV INPUT
EXT
LINK
TIMER REC
(4) (5) (6)
(7)
(1)
(2)
(3)
(1)
(2)
(3)
AV2 [
AV1 [T S VIDEO
AV 4
IN
VIDEO
L
R
AUDIO
OUT (4)
(5)
(6)