Panasonic DMR-E60 - Manual (Page 13)

13
Connecting and Setting up (continued)
Auto Setup
Auto Setup automatically tunes all available stations.
1 Press [ Í, DVD] (1) to switch the unit on.
DMR-E60GCS: Auto-Setup screen appears on the television
and go to step 3.
DMR-E60GN: The Country setting menu appears on the
television.
2 Use [ 3, 4, 2, 1] (10) to select the country and
press [ENTER] (10).
3 Auto Setup starts.
≥ This takes about 5 minutes.
≥Auto Setup is complete when you see the television picture.
To cancel Auto Setup before it finishes
Press [RETURN] (28).
The clock setting menu appears after Auto Setup
finishes
1) Use [ 3, 4, 2, 1] (10) to set the correct time and date.
2) Press [ENTER] (10) to conclude the setting.
To confirm that stations have been tuned correctly
See page 59.
When no stations have been set, confirm all
connections and restart Auto Setup
See page 60 and Hint below.
When station names or channel numbers have not
been set correctly
See page 59.
Hint
≥You can restart the Auto Setup if the screen of the unit’s tuner is
displayed in the stop mode. Hold down [ W, CH] (23) and [X, CH]
(23) on the main unit simultaneously for about 5 seconds.
ENTER
RETURN
SELECT
Country
RETURN : leave ENTER : access
Australia
New Zealand
Others
Auto-Setup
RETURN
Auto-Setup in progress, please wait.
RETURN: to abort
128
Selecting TV screen type
The aspect ratio is factory set to 4:3 for a regular television. You do
not have to change this setting if you have a regular 4:3 aspect
television.
Preparation
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
≥Switch [DVD, TV] (19) to “DVD”.
1 Press [ Í, DVD] (1) to turn this unit on.
2 Press [SETUP] (35) to show the SETUP window.
3 Use [ 3, 4] (10) to select the “Connection” and
press [ 2] or [1] (10).
4 Use [ 3, 4] (10) to select “TV Aspect” and press
[ENTER] (10).
5 Use [ 3, 4] (10) to select the TV aspect and press
[ENTER] (10).
≥4:3 (factory setting)
≥16:9
ªTo return to the previous screen
Press [RETURN] (28).
Hint
SETUP window appears also by selecting “SETUP” from the
FUNCTIONS window (page 23).
For your reference
Apart from “TV Aspect”, other settings also affect how video
appears on your television. Check the following if video doesn’t
appear correctly on your television.
≥“Connection” — “Norm (4:3) TV Settings (DVD-RAM)” or “Norm
(4:3) TV Settings (DVD-Video)” (page 56).
≥The video setting on the disc. How video appears is often
specified by the disc itself.
≥The video settings on your television.
TAB SELECT
TV Aspect
Normal (4:3) TV
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
Progressive (NTSC)
Norm (4:3) TV Settings (DVD-Video)
Norm (4:3) TV Settings (DVD-RAM)
ENTER
TV System
SETUP
Settings
Disc
Picture
Sound
Display
Connection
Tuning
SELECT
ENTER
TV Aspect
RETURN
Norm (4:3)
Wide (16:9)