Panasonic DMR-E60 - Manual (Page 63)

63
Glossary
Bitstream
This is the compressed form of digital signals. A decoder decodes
these signals into 5.1 surround and multi-channel signals.
Channel (when referring to DVD)
Sound is divided into channels based on the sound’s role.
For example, 5.1 channel
≥Front speakers – 1 left channel and 1 right channel
≥Center speaker – 1 channel
≥Surround speakers – 1 left channel and 1 right channel
≥Subwoofer – 1 channelk0.1 (the ratio of bass to the total amount
of sound output)
Examples as shown in the status display
(1) 1: Subwoofer signal
(not displayed if there is no subwoofer
signal)
(2) 0: No surround
1: Mono surround
2: Stereo surround (left/right)
(3) 1: Center
2: Front left iFront right
3: Front left iFront rightiCenter
DIRECT NAVIGATOR
This is a list of programmes you have recorded. You can select
programmes from the list to view. The list also shows the date and
time of recording, the channel, and the titles of titled programmes.
The selected programme is played in the background, making
selection even simpler.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2 channel) audio, these signals
can also be 5.1-channel audio. A large amount of audio
information can be recorded on one disc using this method.
Dolby Pro Logic
A surround system where a 4-channel audio track is recorded as
2 channels and then is restored to 4 channels for play. The
surround channel is monaural.
DPOF (Digital Print Order Format)
DPOF is the standard printing format for still picture data. It is used
at a photo studio to print out the still picture data taken with a digital
camera etc. or when you print out using a domestic printer.
DTS Digital Surround
This surround system is used in many movie theaters around the
world. The separation between channels is good and the
compression ratio is low, so realistic sound effects are possible.
DTS soundtracks are produced with the assumption that all
channels will be used.
Film and video
DVD-Video are recorded using either film or video. Usually, film is
recorded at 24 frames per second, the rate movies are filmed at,
while video is recorded at 30 frames per second.
Finalize
This process allows DVD-R to be played on compatible equipment.
Frame and field
Frames are the still pictures that go together to make a moving
picture. A frame is made up of 2 fields.
≥A frame still is made up of two alternating fields, so the picture
may appear blurred, but overall quality is high.
≥A field still is not blurred, but it has only half the information of a
frame still so picture quality is lower.
Interlace and progressive output
NTSC has 480 interlaced (i) scan lines, whereas progressive
scanning uses twice the number of scan lines. This is called 480p.
The video signals output from this unit’s COMPONENT VIDEO
OUT terminals (Y, P
B , P R ) allow you to enjoy higher quality pictures
than if the signals were output from the VIDEO OUT terminal or
S-VIDEO OUT terminal.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding colour still
pictures.
If you select JPEG as the storage system on digital cameras etc.,
the data will be compressed to 1/10– 1/100 of its original size. The
special quality of this standard is that there is little deterioration in
picture quality in comparison to the degree of compression.
Linear PCM
This is a form of signal that has been digitized without compressing
it. CDs are recorded with 44.1 kHz/16 bit PCM, while DVDs use
PCM between 48 kHz/16 bit and 96 kHz/24 bit, allowing
reproduction of greater quality sound.
The linear PCM signals output from the DIGITAL AUDIO OUT,
OPTICAL terminal are stereo (2 channel).
LPCM sound is available when recording in XP mode.
NICAM (NICAM Broadcasting System)
This is a 2 channel sound broadcast system which in most
instances provides high quality stereo sound. Broadcasters can
also transmit two separate mono soundtracks on this system.
Pan&Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen television with an aspect ratio of 16:9.
This means you can view most material with the intended aspect
ratio on a widescreen television.
Material with this ratio will not fit onto a standard television with an
aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and
“Letterbox”, deal with this problem.
Pan&Scan:
The sides are cut off so the
picture fills the screen.
Letterbox: Black bands appear at the top
and bottom of the picture so the
picture itself appears in an aspect
ratio of 16:9.
Playback control (PBC)
This is a method of playing Video CDs. You can select parts to
play by using menus recorded on the disc.
PLAY LIST
This is a collection of scenes. It enables you to play these scenes
in succession or to select specific ones to play.
Programme (PRG)
The section between the point where recording is started and the
point where it is stopped.
Sampling frequency
This is the number of samples of sound taken per second during
conversion to a digital signal. A high sampling frequency results in
a sound close to the original when played back.
S-video output
The colour and luminance signals are separated before being sent
to the television, making for greater picture clarity.
TIFF (Tag Image File Format)
A still picture data standard.
A common format for storing high quality images on digital
camera’s and other devices.
3/2 .1 ch
(2)
(1)
(3)
= +
Frame Field Field