Panasonic DMR-E60 - Manual (Page 27)

27
Timer recording (continued)
ª To put the unit on recording standby
Press [ , TIMER] (14).
Ensure “ ” lights on the unit’s display.
ª To change the timer recording programme
1) While the Timer Programme List Screen is being shown, use
[ 3, 4] (10) to select the programme you want to change, and
press [ENTER] (10) to show the Timer Programme Correction
screen.
≥You may also select programme by inputting a 2-digit number
using the numeric buttons (4).
≥Use [2, 1] (10) to move to the page preceding or following
the one on display.
2) Move through the items with [ 1] (10) and change the settings
with [ 3, 4] (10) and press [ENTER] (10).
Note
≥The built-in clock employs 24-hour system.
≥The remaining time is not shown if you insert discs other than
DVD-RAM or DVD-R.
≥The remaining time displayed is calculated based on the current
recording mode.
≥If the disc is protected (pages 30, 65), the unit switches to
standby but does not go on standby for recording. Check the disc
carefully.
≥“PROG FULL” is displayed in the unit’s display if there are already
16 items programmed. Delete unnecessary items (page 27).
≥Recording is not possible unless you set “Disc Protection” in
“DISC INFORMATION” to “Off”. (page 30)
≥You cannot record to a disc if the write protect tab on a cartridge
disc is set to protect. Release this before operation (page 65).
≥Even if the unit is put in the timer recording standby mode or the
timer recording is being performed, you can play a programme.
≥When recording more than one programme in a row, for
DVD-RAM the first few seconds, and for DVD-R about the first
30 seconds of all programmes from the second one onwards will
not be recorded.
To check programmes
[RAM] [DVD-R]
Press [PROG/CHECK] (13).
The Timer Programme List screen appears.
Icon explanations ( A)
¥ This programme is currently recording.
W The programme is overlap with another programme.
F The disc was full or the maximum number of programmes or
scenes was reached so the programme failed to record.
The television programme was copy-guarded so the
programme failed to record.
TV system of the programme is different from the setting in
SETUP, so the programme failed to record.
X The programme did not complete recording because the
disc is dirty or some other reason.
Disc space ( B)
OK: Displayed if the recording can fit in the remaining
space on the disc.
# (Date): For recordings made daily or weekly, the display
will show until when recordings can be made
based on the time remaining on the disc.
!: Displayed if the disc is not inserted in the unit or is
write-protected (pages 30, 65) or there is not
enough memory capacity left on the disc.
ªTo exit from the Timer Programme List screen
Press [PROG/CHECK] (13) or [RETURN] (28). (The television is
shown.)
For your reference
≥Programmes that failed to record are deleted from the list at 4
a.m. the day after tomorrow.
Starting and canceling programmes
[RAM] [DVD-R]
ªTo put the unit on recording standby
Press [
, TIMER] (14).
The unit turns off and “ ” lights on the unit’s display.
Note
≥The unit cannot go to timer recording standby if the disc is
protected (pages 30, 65) or full (“ ” flashes). Check the disc
carefully.
ªTo release the unit from recording standby
If you want to record something else before the programme start
time, for example:
Press [ , TIMER] (14).
The unit turns on and “ ” goes out.
≥Be sure to press [ , TIMER] (14) before the programme start
time to put the unit on recording standby. The programme only
works if “ ” is on.
ªTo stop recording while a programme is working
Press [
, TIMER] (14).
To clear a timer recording programme
[RAM] [DVD-R]
Press [CANCEL] (5) or [ERASE] (32) while the
programme’s Timer Programme Correction screen is
being shown.
(Alternatively, use [
3, 4] (10) to select the programme
in the Timer Programme List screen and press
[CANCEL]
(5) or [ERASE] (32).)
≥You can not delete programmes that are currently recording.
RETURN
SELECT
SP OK 1:22 1:19 64 ABC 15/ 7 TUE 01
Mode Disc
space Stop Start No. Name Date
1:58 SP
TIMER
RECORDING
Remain
1:19:00 15.7 TUE
ENTER
CANCEL
New Timer Programme
02
03
04
05 64 ABC
64 ABC
64 ABC
64 ABC 15/ 7 TUE
23/ 7 WED
23/ 7 WED
23/ 7 WED 1:20
8:00
9:00
10:00 2:20
9:00
10:00
11:00
SP
SP
SP
SP OK
OK
OK
OK W
F
X
A B