Panasonic DMR-E60 - Manual (Page 35)

35
Using the DIRECT NAVIGATOR (continued)
Dividing programmes
[RAM]
You can divide a selected programme into two.
You must be sure you wish to divide a programme because
once a programme has been divided it cannot be returned to
its original form.
Preparation
≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc you have recorded on.
After performing steps 1 to 3 of “Erasing programmes”
(page 33), perform the following steps:
4 Use [ 3, 4] (10) to select “Divide” and press
[ENTER] (10).
5 Use search functions such as fast-forward and
slow-motion to find the point you want to divide and
press [ENTER]
(10).
6 Use [ 3, 4] (10) to select “Exit” and press [ENTER]
(10).
7 Use [ 2] (10) to select “Divide” and press [ENTER]
(10).
≥The programme is divided at the point.
ªTo stop partway through
Select “Cancel” in step 7 and press [ENTER] (10).
Or
Press [RETURN]
(28).
ªTo change the point to divide
Select “Divide” in step 6, then repeat steps 5–7.
ªTo check the division point
By selecting “Preview” in step 6 and pressing [ENTER] (10), play
will begin from a point 10 seconds prior to the division point. You
may wish to make sure that the division point is at an appropriate
location.
Note
≥The divided programmes retain the title of the original
programme.
≥A minute portion of the recording directly preceding the division
point may be lost.
For your reference
≥Use search and slow-motion to find the points.
≥It is not possible to carry out “Divide” in the following cases:
-When the resulting part(s) are extremely short.
-When the total number of programme is more than 99.
Divide
3
Preview
Divide
Exit
RETURN ENTER
SELECT
Divide
Programme
03
0 : 00 . 05
0 : 00 . 05
Divide Programme
Once divided, this programme cannot be
re-combined.
Divide Cancel
RETURN ENTER
SELECT
Using PLAY LIST to edit programmes
Displaying PLAY LIST
[RAM]
Preparation
≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc you have recorded on.
Press [PLAY LIST] (27).
The play list screen appears. Scenes are not displayed if you have
not yet created a play list with the disc.
ªTo clear the PLAY LIST screen
Press [PLAY LIST] (27) or [RETURN] (28).
The screen returns to the state it was in before you called up the
play list.
ªWhat you can do with the PLAY LIST screen
≥Creating PLAY LIST (page 36)
≥Playing PLAY LIST (page 36)
≥Select a scene to play (page 37)
≥Add, move, re-edit and erase scenes
(pages 37–39)
≥Copying PLAY LIST (page 39)
≥Erasing a PLAY LIST (page 39)
≥Give PLAY LIST titles (page 39)
≥Checking PLAY LIST’s contents
(page 39)
For your reference
≥When the disc is protected (pages 30, 65), you can only access
“Play Scenes” and “Properties”. Release the protection to access
other items.
About the PLAY LIST Scene screen
a) Play list information
This shows the play list number, date of creation (date/month),
total play time, and the number of scenes it contains and title (if
entered).
b) Scenes
9 scenes can be shown on a page.
c) Turning pages
If there are more than 9 scenes, use [
3, 4, 2, 1] (10) to
select “ 2 Back” or “Next 1” and press [ENTER] (10) to move
to the previous page or next page. You can also enter the
three digits with the numeric buttons
(4).
PLAY LIST
- - - - - -
No. Date Total Scene Edit Title
Auto action
USJ 01 15/7 006
006 0:03
02 15/7 0:07
03 23/7
004 0:06 Dinosaur
3
3
1
1
1
1
1
1
002 003
004
001
— – – / – – : –
0 – 9
No.
RETURN ENTER
SELECT
Edit
PL Copy
PL Erase
Enter Title
Properties
Play Scenes
PLAY LIST
Play Scenes
SELECT PAGE
001/001
3 15/7 0:02 004 Dinosaur
Back Next RETURN ENTER
SELECT - - - - - - - - -
- - -
002 003
004 - - -
001 00:00.19
a)
c)
b)
0 – 9